List of design results
FEM-Design provides a wide range of design result types that let you evaluate utilizations, design forces, internal forces and reinforcement produced by the design modules. Each result type below can be available for one or more design modules, similar to how a single analysis result can appear under several analysis groups.
The available result types depend on the structural elements in the model, the selected design module and the design settings. Below are the individual design results:
note
To see how the design modules themselves are grouped, see the topic:
Design ➔ Design results ➔ Design results grouping
- ↘ Value – deflection value, for general design
- ↘ Utilization – the governing design check ratio, available for nearly every design module
- ↘ Utilization by panel – utilization broken down per timber panel
- ↘ Settlement utilization – utilization from the settlement check of foundation slabs
- ↘ Insulation utilization – utilization from the insulation check of foundation slabs
- ↘ Design forces – design forces for RC bar and RC shell reinforcement
- ↘ Internal forces – internal forces for RC concealed bar and masonry wall
- ↘ Required, applied and missing reinforcement – reinforcement area for RC shell longitudinal reinforcement
- ↘ Reinforcement – applied and missing reinforcement for RC shell shear reinforcement
- ↘ Detailing rules – detailing rule checks for RC shell longitudinal reinforcement
- ↘ Crack width – crack width for RC shell longitudinal reinforcement
- ↘ Shear capacity – shear capacity components for RC shell shear reinforcement
- ↘ Utilizations – utilization of each shear capacity component for RC shell shear reinforcement
- ↘ Forces – forces in steel joints