Export to Excel

---

This creates an Excel file, either from the Export to other file formats tab or from a selection in the Display of models viewer.

Two files can be generated: a Results file with the design capacities, utilizations and loads, and a Geometry file with the element dimensions and cross-sections.

Results

The Result file will contain information about:

• Shell elements – q_Rd: design capacity [kN/m], and u: utilization as decimal [ - ] (1 = $100\,\mathrm{\%}$), broken down per edge, load combination and force component

• MAX results – the governing maximum and minimum force and moment values per shell edge across all load combination types, given as both a resultant and a line-distributed value

• Rebar anchorages – the axial force in each anchorage for every load combination, plus the maximum compression and maximum tension across all combinations

• Loads – point and line loads on shells and covers, with load case, direction, value and location

Geometry

The Geometry file will contain information about:

• Shell elements – name, type, bounding-box width and height and plan area

• Holes – position and size for rectangular and circular holes, and the edge-by-edge contour for special, freeform holes

• Beams and columns – name, type, length, material and start and end cross-sections